Our unique system uses piezo technology, giving proportional indication of line speed/vibration with no moving parts whatsoever

Digital Signal Processing

Years of development went into improving the performance of the alarm to give better bite indication and control than ever before. The Txi-D converts the signal level to a number which is used to digitally construct the beeps. In addition predictive software algorithms scale the beeps to make them slower or faster using the new beep speed control. The tone of each beep is digitally replicated at the alarm and at the receiver, producing pure digital tones that are never distorted.

Beep Speed Control

This unique feature allows the Beep Speed to be set to personal preference, totally independently from the Response Level.

X Digital Radio

Advanced digital radio technology has now been incorporated into our products giving us the best range, penetration and performance we have ever had.

X Advanced Security System

Having been the first bite alarm to have an anti theft system, we have added to this with our patented IMU (Inertial Measurement Unit) movement detection system. This gives an additional layer of security in vulnerable situations – where attempted movement of the Txi-D will transmit an alert to the Rx-D.

Variable LED Brightness

The LED brightness can now be adjusted up or down with 8 different levels, allowing the user complete control to set the LEDs to their own preferred brightness.

X Stealth Mode

This is a Special Night setting for Delkim illuminated visual indicator users or used as a Stealth Mode. When set the alarms internal LEDs no longer flash and latch but night marking is on. The LED in the Delkim illuminated visual indicator lights up as normal with activation, giving a stunning visual effect.

Instant Day/Night setting

The user now has the ability to preset his chosen LED brightness for day time and night time. This can then be switched between by the press of a button.

Low Battery Warnings

The alarm has both and low and battery fail warning. The battery level is checked continuously during use to make sure there is not drop in performance.

Mute Function

Allows the alarm speaker to be muted for up to 5 mins to help with setting up after you have cast out.

Quick Start

Basic settings that allow immediate use.

Advanced Weather Protection

We have invested in state of the art robotic machinery to coat our circuits. This gives us the best possible weather proofing, meaning the user can have even greater confidence.

64 Digital Tone Settings

With push button control, the required tone can now be selected from 64 separate tones, whilst still incorporating the signature Delkim warble.

Auto Power Down

This feature is designed to protect your battery, should the unit be left on or switched on accidentally. If left on it will power down after approximately 48 hours of non-activity. If the buttons are pressed accidentally in your bag it will also turn off after around 20 seconds.

Memorised User Preferences
All settings are memorised, so once you get it exactly how you want, there is no need to change it.

Smaller Design & Precision Mouldings
We have invested in high quality, precision mouldings to improve the fit and appearance. Whilst reducing the size of the alarm, we have retained the Delkim look.

Twin Clear High Visibility LEDs

Available in 6 colours Purple, Red, White, Blue, Green, and Yellow.

NiteLite output socket (2.5mm)

For the connection of our illuminated visual indicators.

High Volume

Adjusting from zero to 100db

Extremely long battery life

Unrivalled battery life, when using recommended high quality 9V PP3 (eg, Duracell MN 1604)

Moulded Hard Case

This provides maximum protection when the alarm is not in use.